Where to put the QR code on a stand: roll-up, counter card, T-shirt, lanyard
Put the main QR code at eye level, and print every code about one tenth as wide as the distance it will be read from. A code read from 2 m away should be about 20 cm wide (2 m divided by 10 is 0.2 m), and one read from 3 m away about 30 cm.
That is a rule of thumb, not a guarantee, so scan your printed proof from the real distance before the show. The rest of this post covers contrast, file formats and ten places to put the code, from roll-up to lanyard.
The size rule: one tenth of the viewing distance
Work out how far away the person will be when they decide to scan, then divide that distance by ten. The answer is the width of the code. A card on a counter is read at arm's length, so a small code is enough. A roll-up at the aisle edge is read by people walking past, so its code has to be much bigger.
If you cannot make the code as big as the rule asks, move it closer to the people instead. A code that is too small for its distance is an easy mistake to make, and the fix is cheap before printing and expensive after.
To test it, print a 1:1 proof of the code on A4 if it fits, stick it where the real one will go, and test-scan it from the intended distance with two or three different phones. If any phone struggles, make the code bigger or move it nearer. For large pieces such as a roll-up, ask the printer for a proof before the full run.
Contrast and the quiet zone, in plain words
Contrast means the code is clearly darker than the background behind it. Dark code on a plain light background is the safe choice. Avoid pale colours on pale colours, avoid printing the code over a photo or a pattern, and be careful with glossy finishes, where glare can hide the code under bright stand lights. Test it under the lighting you will have.
The quiet zone is the empty margin around the code. Keep it blank: no border, no text, no logo and no edge of the banner touching the code. The camera needs that margin to find where the code starts. Do not stretch the code, crop it, recolour it or put anything over the middle.
SVG for print, PNG for screens
When you order the game from BoothBuzz you get a print-ready QR in two formats: SVG for print and PNG for screens. SVG is a vector file, so it can be scaled from a table flag to a backdrop without going blurry. Send the SVG to the printer or your designer.
Use the PNG for anything on a screen, such as the stand TV, a stand iPad running the kiosk link, or a slide. A small PNG stretched onto a roll-up will print soft. The full list of what you receive is in how BoothBuzz works, step by step.
Put the main code at eye level
Eye level is taken as 1.6 m from the floor. That is roughly where people's eyes are as they walk, so the code sits in their line of sight and nobody has to bend or stretch to scan it. On a back wall, repeat the code at two heights, so that if someone stands in front of one, the other is still in view.
A code on its own is a puzzle. Put one line beside it that says what happens and what the prize is, and the draw time if you have one. The start screen shows your logo, prize and a Play button, so the words on the print and the screen should match.
Ten places to put the QR code
Every item below is a printonline.ae product. Prices and lead times change, so read both on the product page before you order.
| Placement | Where the QR code goes | Why it works |
|---|---|---|
| Roll-up banner | Standing at the edge of the aisle, with the QR at eye height | Often the first thing people see from the aisle, so make this the biggest code on the stand. |
| Shell scheme panel branding | Back wall, QR repeated at two heights | If a crowd blocks one code, the other stays in view. |
| Promotional stand | Front counter, QR facing the aisle | Can catch people who slow down at the counter without stepping in. |
| Acrylic counter stand | Counter card with the QR and the prize line | Read at arm's length, so it can be small, and the prize line says why to scan. |
| Staff T-shirt | QR on the back with the line "Scan me, beat me" | Every team member in the hall becomes a moving invitation. |
| Polo shirt | QR on the back, for formal B2B stands | Gives a smart-dress team the same walking invitation. |
| Lanyard | Staff lanyards with the QR on the card | Sits at chest height in every conversation. |
| Table flag | Meeting tables inside the stand | Lets people already seated join the leaderboard. |
| Stickers and labels | QR stickers on samples and giveaways | Takes the invitation along the hall with the visitor. |
| Flyers and brochures | QR on the handout for people who walk past | Can reach visitors who never stopped. |
Staff who already wear a show badge can carry the code on a separate badge-sized card from the ID cards, badges and lanyards category. You do not need all ten placements. Start with the roll-up, the counter and your staff, then add the rest as your budget allows.
For the layout of a small stand, see how to make a 3 by 3 shell scheme stand work harder, and read Will venue Wi-Fi break your lead capture if you are worried about the network at the venue.
Repeat the code at the queue point and on your staff
Ten people can play at once, so a group arriving together can all scan the same code. Where people wait, for a staff member or for a turn, put a second code. A visitor who scans while waiting can fill in the form and play before anyone has reached them.
The staff T-shirt is the strongest repeat. A QR on the back turns every team member walking the hall into a mobile invitation, and people behind them can scan as they walk. Check the print area on the product page, and print "Scan me, beat me" above the code.
This is where the QR code starts the networking. The visitor scans first and opts in with a real name and email, so the staff member opens with the visitor's own score instead of a cold hello. The leaderboard, in either of the two games, then gives them a reason to return and a reason to bring a colleague, and the prize draw gives you a public moment as host. Every lead arrives with a conversation already started and a timestamp.
Print lead times and next-day delivery
Order the game first, because the QR files come with it, and send the SVG to print once you have it. Then check the lead time on each product page, since each product has its own. If the show is close, start with the next-day delivery category before you commit to a design.
Before the start date, the public game link shows a Coming soon page with a staff password box. That means a printed proof will open that page, and your team can enter the password and play the real game to test the whole route from scan to leaderboard.
FAQ
What size should a QR code be on a banner?
Make it about one tenth as wide as the distance people will read it from. For a roll-up read from 3 m away that is about 30 cm. Always scan the proof from the real distance before you print the full run.
Should I use SVG or PNG for a QR code?
Use SVG for print, because it scales without losing sharpness, and PNG for screens such as a TV or a stand iPad. You receive both with your game.
Do visitors need an app to scan the QR code?
No. A phone camera reads the code in about 3 seconds, then the game opens straight in the browser. There is nothing to install.
Where should the QR code go on a 3 by 3 shell scheme stand?
Put one on a roll-up at the aisle edge at eye level, repeat it on the back wall at two heights, and add a counter card facing the aisle. Put a second code on each staff T-shirt back.
Once the codes are on your print list, book Gem Rush or Flip Match for the show and check the pricing while you decide.